Installing 3.5-Inch Hdd Modules; Required Tools; Preliminary Steps; Removing A 3.5-Inch Hdd Dummy Module - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.2.2

Installing 3.5-inch HDD modules

Customer Replaceable Units (CRU)
Average task duration: 5 minutes
7.2.2.1

Required tools

Preliminary and concluding steps: tool-less
●
Installing a 3.5-inch HDD module: tool-less
●
7.2.2.2

Preliminary steps

Perform the following procedures:
"Opening the rack door" on page 64
Ê
Ê Locate the correct drive bay as described in section
inch HDDs" on page
7.2.2.3

Removing a 3.5-inch HDD dummy module

Figure 43: Removing a 3.5-inch dummy module
140
138.
Upgrade and Maintenance Manual
"Mounting order for 3.5-
RX300 S7