Replacing The Power Backplane; Required Tools; Preliminary Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

6.5

Replacing the power backplane

Field Replaceable Units (FRU)
Average task duration: 10 minutes
6.5.1

Required tools

Preliminary and concluding steps: tool-less
●
Replacing the power supply unit: tool-less
●
6.5.2

Preliminary steps

Perform the following steps:
"Opening the rack door" on page 64
Ê
"Locating the defective server" on page 56
Ê
"Disabling BitLocker functionality" on page 85
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
"Extending the server out of the rack" on page 69
Ê
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
"Removing the server cover" on page 72
Ê
"Removing the air duct" on page 73
Ê
RX300 S7
Upgrade and Maintenance Manual
Power supply
70.
129