Trusted Platform Module (Tpm); Installing The Tpm Board; Required Tools; Preliminary Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

System board and components
14.3

Trusted Platform Module (TPM)

14.3.1 Installing the TPM board

Field Replaceable Units (FRU)
Average hardware task duration: 5 minutes
Average software task duration: 5 minutes

14.3.1.1 Required tools

Preliminary and concluding steps:
●
– Phillips PH2 / (+) No. 2 screw driver
Installing the TPM:
●
– Bit screw driver
– TPM bit insert
( )
* For the Japanese market:
– TPM module fixing tool (S26361-F3552-L909)

14.3.1.2 Preliminary steps

Perform the following procedures:
"Disabling BitLocker functionality" on page 85
Ê
"Opening the rack door" on page 64
Ê
"Locating the defective server" on page 56
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
"Extending the server out of the rack" on page 69
Ê
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
468
( )
*
Upgrade and Maintenance Manual
70.
RX300 S7