Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual page 202

Expansion cards and backup units
"Enabling BitLocker functionality" on page 107
Ê
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I
Configuration of network settings should be performed by the
customer.
For further information, please refer to section
settings recovery" on page
"After replacing / upgrading LAN controllers" on page 112
Ê
"Closing the rack door" on page 84
Ê
202
199.
Upgrade and Maintenance Manual
"Note on network
RX300 S7