Removing The Defective Odd; Installing The New Odd; Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Accessible drives
"Removing the fan box" on page 183
Ê

12.7.3 Removing the defective ODD

"Removing the ODD" on page 352
Ê
Figure 205: Removing the ODD latch
Ê Remove the two screws (1).
Ê Remove the ODD latch on the rear of the defective ODD (2).

12.7.4 Installing the new ODD

"Preparing an ODD" on page 348
Ê
"Installing an ODD" on page 350
Ê

12.7.5 Concluding steps

Perform the following procedures:
356 Upgrade and Maintenance Manual
RX300 S7