Removing A Processor; Opening The Cover Plate - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

"Removing the server cover" on page 72
Ê
"Removing the air duct" on page 73
Ê
"Removing processor heat sinks" on page 329
Ê

11.3.3 Removing a processor

I
This description applies to the following procedures:
– Removing CPU 2 from a dual-processor configuration
– Removing CPUs from a defective system board (see section
"Swapping processors" on page
Ê Remove the desired processor heat sink as described in section
processor heat sinks" on page

11.3.3.1 Opening the cover plate

Figure 157: Opening socket release lever 1
RX300 S7
329.
Upgrade and Maintenance Manual
495)
Processors
"Removing
303