Preliminary Steps; Removing Pci Slot Bracket - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
9.2.1.2

Preliminary steps

Perform the following procedures:
"Opening the rack door" on page 64
Ê
"Disabling BitLocker functionality" on page 85
Ê
"Disabling SVOM boot watchdog functionality" on page 86
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
"Extending the server out of the rack" on page 69
Ê
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
"Removing the server cover" on page 72
Ê
"Removing the air duct" on page 73
Ê
9.2.1.3

Removing PCI slot bracket

Figure 82: Removing the PCI slot bracket (B)
Ê Remove the screw.
Ê Remove the slot bracket.
192 Upgrade and Maintenance Manual
70.
RX300 S7