10.2.4 Concluding steps
Perform the following procedures:
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
"Updating or recovering the system board BIOS and iRMC" on page 92
Ê
"Enabling SVOM boot watchdog functionality" on page 101
Ê
"Verifying the memory mode" on page 102
Ê
"Enabling BitLocker functionality" on page 107
Ê
RX300 S7
Upgrade and Maintenance Manual
77.
Main memory
283