Installing A Local Service Display (Lsd) Module; Required Tools; Preliminary Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Figure 188: Accessible drive (DAT/RDX) in HDD bay for 2.5-in HDD version
12.2 Installing a Local Service Display (LSD)
module
Upgrade and Repair Units (URU)
Average task duration: 10 minutes

12.2.1 Required tools

Preliminary and concluding steps: tool-less
●
Installing the LSD: tool-less
●

12.2.2 Preliminary steps

Perform the following procedures:
"Disabling BitLocker functionality" on page 85
Ê
"Opening the rack door" on page 64
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
"Extending the server out of the rack" on page 69
Ê
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
RX300 S7
Upgrade and Maintenance Manual
Accessible drives
70.
337