Minimum Startup Configuration - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Appendix
17.4

Minimum startup configuration

Field Replaceable Units (FRU)
If the server does not start up or other problems occur, it may be necessary to
take the system down to its most basic configuration in order to isolate the
defective component.
The minimum startup configuration consists of the following components and
cables:
Component
System board
CPU with CPU heat sink
1 memory module
Front panel module
Power supply unit
Table 11: Minimum startup configuration - components
Cable
Front panel cable
Power cable
Table 12: Minimum startup configuration - cables
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
Ê Take the system down to its minimum startup configuration.
"Connecting the server to the power source" on page 81
Ê
Ê Connect a keyboard, mouse and display to the server.
"Switching on the server" on page 82
Ê
558
Notes
no TPM, UFM or expansion cards installed
installed in DIMM slot 1A
without connected front LAN module
Notes
Upgrade and Maintenance Manual
RX300 S7