Info: Insert; Info: Remote; Info: Alarms Mask; Info: Misc - Comtech EF Data CDM-625 Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625:

Table of Contents

CDM-625 Advanced Satellite Modem

Front Panel Operation

Info: Insert

Insert Type=

An example of an Insert Info screen is shown here. This screen shows the Insert Type and

channel allocations. Press ENTER or CLEAR to return to the previous menu.

When in QDI (Quad Drop & Insert) Mode, this screen displays the same

information as the CONFIG: D&I  Drop menu.

Remote-Control= Local

Interface= RS-232

An example of a Remote Info screen is shown here. This screen shows if the unit is in Local,

Remote or Ethernet (IP) mode. It also displays the electrical interface type selected, the unit's

address, and the active baud rate.

Alarms Masked: TxAIS

A sample Alarms Mask Info screen is shown here. Note that, while all available masks are

displayed here, this screen will show only the alarm(s) that are currently masked. For any alarm

that is not masked, a blank space assumes that item's designated screen position.

Miscellaneous:

1:1 Switch=Not connected

The Miscellaneous Info screen provides the following information:

Operational Mode

1:1 Switch Link Status

Redundancy Status

Address= 0000

Configuration Setting

Test Mode or Normal.

Connected or Not Connected.

Offline or Online.