Table of Contents
Advertisement
CDM-625 Advanced Satellite Modem
Appendix D
Command
Parameter
Number of
(Instruction
Type
Arguments
& Qualifier)
...Global
Configuration
(cont.)
OGC Outdoor
OGC=
50 Bytes
Unit Global
Copy
Description of Arguments
ee=Compressed Ethernet port speed
E=Attach summary BUC alarm to Tx
F=Attach summary LNB alarm to Rx
GGG=WAN buffer length
H=Dedicated Management Port
Note: Much of the 625 MGC format has been kept similar to the 600/L MGC format.
* indicates differences.
** E thernet po rt s peed i s c ompressed f rom 4 by tes i n S EC c ommand t o 2 by tes i n MG C. F irst by te
represents speed settings for Port 1 and Port 2, second byte represents speed settings for Port 3 and Port
4. In each byte, character A through Y is used to represent 25 possible combinations of two port speed.
A=00, B=01, C=02, D=03, E=04, F=10, G=11, H=12, I=13, J=14, K=20, L=21, M= 22, N=23, O=24, P=30,
Q=31, R=32, S=33, T=34, U=40, V=41, W=42, X=43, Y=44.
Example: BN is converted to 0123, that means Port 1 is AutoNeg, Port 2 is 100Full, Port 3 is 100Half, Port
4 is 10Full.
Command or Query.
ODU Global Configuration of CDM-625, in the form shown in the Response to Query column (to the right), where:
aa=BUC Address
b=BUC Tx Output Enable
* x (spare)
d=BUC Power Supply
e=BUC 10MHz Reference State
xxxxx (spares)
gggg=BUC Current - Low Limit
hhhh=BUC Current - High Limit
* xxxx (spares)
* i=LNB Power Supply
* x (spare)
k=LNB 10MHz Reference
lll=LNB Low Alarm Limit
nnn=LNB High Alarm Limit
FFFFFS=TX LO Frequency
fffffs=RX LO Frequency
xxxxxx (spares)
Notes:
1.
Much of the 625 O GC f ormat has been k ept s imilar t o t he C DM-600L OGC f ormat ( * i ndicates t he
differences). In 600L Emulation Mode, OGC follows the CDM-600L's OGC format.
2.
Any unavailable parameters will be filled with x's.
see **
same as ABA
same as ALA
same as WBL
same as DMP
same as BAD
same as BOE
same as BPS
same as BFR
same as BCL
same as BCH
same as LPS
same as LNR
same as LNL
same as LNH
same as TLO
same as RLO
D–43
Revision 13
MN-CDM625
Query
Response to
Response to
(Instruction &
Command
Qualifier)
OGC=
OGC?
OGC=aabxdexxxxxg
OGC?
OGC?n (where n
ggghhhhxxxxixklllnn
OGC*
= 0 to 9. Returns
nFFFFFSfffffsxxxxxx
OGC#
the OGC portion
of 1 of 10 stored
(Returns current
configurations)
OGC Configuration)
Query
Advertisement
Table of Contents
