CDM-625 Advanced Satellite Modem
Ethernet-based Remote Product Management
6.5.4.3
Configuration Pages
Use the 'Configuration' pages to configure all operating parameters for the CDM-625, including
its ODUs (Outdoor Units) when connected. Click the Modem, LAN, Routing, WAN, Overhead,
Utilities, D&I, BUC, or LNB tab to continue.
6.5.4.3.1
Configuration | Modem
Chapter 5. FRONT PANEL OPERATION
Use the 'Configuration | Modem' page to configure these modem operating parameters:
•
Tx / Rx Interfaces and Framing*
•
Tx / Rx Operating Parameters
*The Tx / Rx Interface Types and Framing Modes have higher priority than other
parameters, and should be configured before setting other parameters.
Click [Submit] to save these settings.
Figure 6-13. Configuration | Modem page
6–24
•
Carrier-in-Carrier (CnC) Parameters
•
ACM Parameters
Revision 13
MN-CDM625