CDM-625 Advanced Satellite Modem
Ethernet-based Remote Product Management
6.4.2
Using the Telnet Interface for Telnet Command Line Interface (CLI)
Operation
Appendix E. TELNET COMMAND LINE INTERFACE (CLI) OPERATION
Figure 6-1. CDM-625 Telnet Command Line Interface (CLI)
1. The CDM-625 Telnet Command Line Interface (CLI) is accessible only when the
2. The CDM-625 Telnet CLI uses Telnet TCP Port 107. Be sure to specify this port
3. The HyperTerminal terminal emulator, while compatible for use with remote
(Left) TeraTerm CLI Example
(Right) PuTTY CLI Example
optional IP Packet Processor is installed and enabled.
when configuring your terminal emulator for CLI operation.
control operations, is not supported or recommended for CDM-625 Telnet CLI
operation. Instead, for best results Comtech EF Data recommends PuTTY or
Tera Term or as the preferred terminal emulators (Figure 6-1).
6–7
Revision 13
MN-CDM625