F.3.3.3.3.4 Odu: Fsk-Control  Buc; F.3.3.3.3.4.1 Odu: Fsk-Control  Buc  Configuration; F.3.3.3.3.4.2 Odu: Fsk-Control  Buc  Status; F.3.3.3.3.4.3 Odu: Fsk-Control  Buc  Advanced-Fsk - Comtech EF Data CDM-625 Installation And Operation Manual

CDM-625 Advanced Satellite Modem
Appendix F
HPA:
Once any KST Alarms screen has been viewed, press ENTER or CLEAR to return to the previous
menu.
F.3.3.3.3.4 ODU: FSK-control  BUC
The menus that follow assume that you have selected and the system has identified a
BUC connected via the Tx IF port.
BUC controls via FSK:
Configuration
◄ ► arrow keys to select Configuration, Status, or Advanced-FSK, and then press ENTER.
Use the
F.3.3.3.3.4.1 ODU: FSK-control  BUC  Configuration
BUC: Tx:On
Use the ◄ ► arrow keys to select Tx: or Addr:
On the top line – For Tx: use the
On the bottom line – For Addr: use the
Press ENTER when done.
F.3.3.3.3.4.2 ODU: FSK-control  BUC  Status
BUC: Pwr=16.2dBm=00.0W
This screen provides read-only status information for the BUC setup. Press ENTER or CLEAR to
return to the previous menu.
F.3.3.3.3.4.3 ODU: FSK-control  BUC  Advanced-FSK
Advanced FSK:
CEFD BUC Type: LPOD
Use the ▲▼arrow keys to select LPOD or 2LPODs, and then press ENTER.
Comms:OK
Over-Temp:OK
Status
(Off,On)
Addr:01 (1-15)
arrow keys to select Off or On.
▲▼
PLL=locked +045°C
9.75V:OK
Bias:OK
Advanced-FSK ()
arrow keys to select an address from 01 to 15.
▲▼
Pclass=5 W
Sw-Ver=01
(LPOD,2LPODs)
F–26
Revision 13
MN-CDM625
-5V:OK
()
()