Comtech EF Data CDM-625 Installation And Operation Manual page 469

CDM-625 Advanced Satellite Modem
Appendix C
Step Task
3
Contact a Comtech EF Data sales representative during normal business hours to order features:
•
•
•
4 Enter the FAST access code(s):
a)
b)
The message "Configured S uccessfully" appears at the t op of t he FAST code section if th e FAST
upgrade is accepted; the modem then resets to its newly-incorporated default configuration.
However, if an invalid code is entered, either of the following messages may appear instead:
Repeat the FAST access code entry procedure. Should the code entry error persist, contact Comtech EF
Data Customer Support for further assistance.
Provide the unit Serial Number to the representative.
Identify and purchase the desired FAST option(s).
Obtain the invoice, the register-specific 20-digit FAST Access Code(s), and t he FAST option
activation instructions.
When a F AST ac cess c ode i s obt ained f rom C omtech E F D ata, it will be for a
specific option register. The FAST options are linked to three option registers:
Register 1 is for Data Rate options.
•
Register 2 is for L-Band, Modulation type and Framing options.
•
Register 3 is the Fractional CnC option.
•
In the 'Admin | FAST' page FAST code section, carefully enter each register-specific 20-
character FAST access code in sequence.
Click [Submit FAST code].
With Firmware Ver. 2.1.0 and later, all three FAST access codes must be entered in
sequence in order for the purchased option upgrades to be properly activated.
C–5
Revision 13
MN-CDM625