CDM-625 Advanced Satellite Modem
Ethernet-based Remote Product Management
6.5.4.2
Admin Pages
Use these pages to set up user access, manage the firmware load preferences, and activate FAST
features.
The Admin pages are available only to users who have logged in using the
Administrator Name and Password.
Click the Access, SNMP, Firmware, Reboot, FAST, or Utilities tab to continue.
6.5.4.2.1
Admin | Access
System Account Access Information
•
Read Only, Read/Write, Admin Names and Passwords – The factory defaults for these user
names and passwords are as follows:
Description
Read Only
Read/Write
Admin
•
SMTP Server – Specify the mail server IP Address from where e-mail may be sent.
•
SMTP Domain Name / Destination – The Administrator can assign the SMTP Domain Name
and Destination. This is required if the e-mail feature of the 'Home | Support' page (Sect.
6.5.4.1.3) is to be used.
Figure 6-6. Admin | Access page
Factory Default User Name / Password
monitor / 1234
opcenter / 1234
comtech / comtech
6–16
MN-CDM625
Typical Parameters
Name and Password fields can be any
alphanumeric combination with a
maximum length of 10 characters.
Revision 13