Conditional Access To Ip Packet Processor Pages - Comtech EF Data CDM-625 Installation And Operation Manual

CDM-625 Advanced Satellite Modem
Ethernet-based Remote Product Management
6.5.3.1

Conditional Access to IP Packet Processor Pages

Carefully review the information in this section.
A significant number of pages in the CDM-625 Web Server Interface address operation of the
CDM-625 when equipped with the optional IP Packet Processor card. These pages are accessible
only when the optional IP Packet Processor card is installed and enabled.
As specified in Sect. 6.5.1, access to these pages is further restricted to "Admin" (administrative)
users only. If a user with "Read/Write" or "Read Only" user access privileges attempts to select
any IP Packet Processor-specific page, access to that page is prohibited and either of the
following error messages may display in the browser window:
Once logged in, if the Admin user attempts to access any IP Packet Processor-specific page when
the optional IP Packet Processor card is not installed, the following message displays:
Click [Back to previous page] to resume use of the interface.
If the Admin user attempts to access these pages when the optional IP Packet Processor card is
installed but card operation is Disabled, the following message displays:
Click [Back to previous page] to continue any other available operations, or go to the Packet
Processor drop-down list (in the Network Configuration section of the 'Configuration | LAN | IP'
page) to select its operation as Enabled (the modem will automatically reboot).
-or-
6–12
Revision 13
MN-CDM625