Connecting The Interface Cable; Available Interfaces; Interface Settings - SATO CL4NX Operator's Manual

2 Installing the Printer

2.4 Connecting the Interface Cable

The connection of the interface cable is explained as follows:
2.4.1

Available Interfaces

This printer supports the following interfaces.
Furthermore, a printer connected with multiple interface cables can continue to operate when receiving
data.
*You cannot receive data from more than one interface at a time.
*You cannot use the LAN interface when wireless LAN is connected.
• USB
• LAN
• Bluetooth
• RS-232C
• IEEE1284
• External signal (EXT)
• Wireless LAN
Note
The wireless LAN interface is optional.
CAUTION
Do not connect or disconnect the interface cables (or use a switch box) with power supplied to either the
printer or the computer. This may cause damage to the interface circuitry in the printer or computer and is not
covered by warranty.
2.4.2

Interface Settings

You can set the various interface settings of the printer through Interface in the Settings menu. For
details, refer to Interface
22
CL4NX Operator Manual
in chapter 4 Operation and Configuration.