SATO CL4NX Operator's Manual page 126

4 Operation and Configuration
EXT 9PIN
Interface > External I/O > Signals > EXT 9PIN
Set the output signal of the EXT 9PIN.
The options are as follows:
• MODE1: Output the print wait signal from the 9PIN.
• MODE2: Output the offline signal from the 9PIN.
EXT Mode
Interface > External I/O > Signals > EXT Mode
Set the external signal (EXT) type.
The options are as follows:
• TYPE1
• TYPE2
• TYPE3
• TYPE4
*Refer to Section 7.7.6 External Signal Interface (EXT) for the
Chart of the EXT Output
124
CL4NX Operator Manual
Signal.
Timing