SATO CL4NX Operator's Manual page 232

7 Appendix
The types of errors to print are as follows:
Message
TAG NOT FOUND
WRITE TAG ERROR
PROTECT (TAG)
ERROR
LOCKING ERROR
MULTI TAGS ERROR
LOST HANDLE
ERROR
DIFFER EPC ERROR
RFID MODULE
ERROR
230
CL4NX Operator Manual
Cause and Countermeasure
Cause Did not find the tag to print, or failed to read the tag.
Countermeasure Confirm the inlay operation and check the printer/antenna
configuration.
Cause Failed to write the tag.
Countermeasure Confirm the inlay operation and check the printer/antenna
configuration.
Cause 1 Tried to write to a locked tag.
Cause 2 Tried to write to an address that is not permitted.
Countermeasure Use media that is not locked.
Cause Failed to lock the tag.
Countermeasure Check the media.
Cause Multiple tags captured simultaneously.
Countermeasure Confirm the inlay operation and check the printer/antenna
configuration.
Cause Failed to perform the GET HANDLE process
Countermeasure Check the media.
Cause Detected inconsistent EPC during a series of processes.
Countermeasure Check the media.
Cause Hardware error occurred.
Countermeasure Contact your SATO reseller or technical support center.