Rear View - SATO CL4NX Operator's Manual

1 Parts Identification
1.1.2

Rear View


Wireless LAN (optional) antenna
To install the optional wireless LAN antenna.

RS-232C connector
To connect the printer to the host computer
using the RS-232C serial interface.

IEEE1284 connector
To connect the printer to the host computer
using the IEEE1284 interface.

EXT connector (External signal
interface)
Interface connector for external signals.
Connect the optional applicator to this terminal.

USB connector (Type B)
To connect the printer to the host computer
using the USB interface.
14
CL4NX Operator Manual

USB connector (Type A)
For connecting to optional USB memory.

LAN connector
To connect printer to the host computer using
the LAN interface.

AC input terminal
Supplies power to the printer through the
inserted power cord.
Before connection, make sure that the AC
voltage of your region is in the range of AC 100
to 240 V, 50 to 60 Hz.
6
7
8
9
10
11
12
13