Error Icon - SATO CL4NX Operator's Manual

4.1.3

Error Icon

When a printer error occurs, the error status shows on the display with an icon.
When an error occurs, you can perform the following operations:
• Change to online mode
• Cancel the error
• Feed the media
• Change to settings mode
• Change to guidance video
Note
The available operations vary, depending on the situation.
The status bar of the display shows the printer status through the icon.
Error Icon.
Clears the error if allowed
for the active error.
Change to offline mode if
allowed for the active
error.
• Error Icon
Icon
Label end or media end is detected
Ribbon end is detected
4 Operation and Configuration
Selection area.
Feed the media if allowed for
the active error.
Change to settings mode or
guidance video.
Description
CL4NX Operator Manual
47