SATO CL4NX Operator's Manual page 40

3 Loading the Ribbon and Media
3
Pull the media holder guide  and media
guide  away from the printer.
Turn the knob
media guide.
4
Load the media in the media holder .
Make sure that the media roll is all the way
in.
5
Push the media holder guide  lightly
against the media roll.
6
Pass the media below the media damper
 and the media sensor guide .
Make sure that the end of the media extends out the
front of the printer.
38
CL4NX Operator Manual
 counterclockwise to release the
1
6
5
3
2
1
4