SATO CL4NX Operator's Manual page 108

4 Operation and Configuration
Enable
Interface > Network > Services > SNMP > Agent > Enable
Enable or disable the functions for Agent.
The options are as follows:
• Enabled: Enable the functions for Agent.
• Disabled: Disable the functions for Agent.
Read-Only
Interface > Network > Services > SNMP > Agent > Read-Only
Set the Read-Only function.
The setting items are as follows:
1 Community
2 User
3 User Security
4 Authentication
Protocol
5 Authentication
Passphrase
6 Privacy Protocol
7 Privacy Pass-
phrase
Community
Interface > Network > Services > SNMP > Agent > Read-Only > Commu-
nity
Set the community name as Read-Only.
You can enter alphabetic, numeric and symbolic characters in the range of
0 to 32 characters.
To disable, keep this field blank.
Initial setting: public
106
CL4NX Operator Manual
Set the community name as Read-Only.
Set the user name as Read-Only.
Set the security level as Read-Only.
*Shows only if User is not empty.
Set the authentication protocol.
*Shows only if you have selected Authentica-
tion or Privacy in the User Security menu.
Set the authentication passphrase.
*Shows only if you have selected Authentica-
tion or Privacy in the User Security menu.
Set the authentication privacy protocol.
*Shows only if you have selected Privacy in
the User Security menu.
Set the authentication privacy passphrase.
*Shows only if you have selected Privacy in
the User Security menu.