SATO CL4NX Operator's Manual page 238

7 Appendix
Print
Print Method
Print Speed
Resolution
Non-printable Area
Printable Area
Print Darkness
Sensors
I-mark
(Reflective Type)
Gap
(Transmissive Type)
Head Open
Label End Sensor
Ribbon End/
Ribbon Near End
Dispenser
Cutter
236
CL4NX Operator Manual
Direct thermal and thermal transfer
203 dpi: 2 to 10 inch/sec (50.8 to 254 mm/sec)
305 dpi: 2 to 8 inch/sec (50.8 to 203.2 mm/sec)
609 dpi: 2 to 6 inch/sec (50.8 to 152 mm/sec)
203 dpi (8 dots/mm)
305 dpi (12 dots/mm)
609 dpi (24 dots/mm)
Pitch direction (Excludes liner)
Top: 1.5 mm (0.06"), Bottom: 1.5 mm (0.06")
Width direction (Excludes liner)
Left: 1.5 mm (0.06"), Right: 1.5 mm (0.06")
203 dpi: Length 2500 mm (98.42") x Width 104 mm (4.09")
305 dpi: Length 1500 mm (59.05") x Width 104 mm (4.09")
609 dpi: Length 400 mm (15.75") x Width 104 mm (4.09")
Darkness level: 1 to 10
Darkness range: A
Position and sensitivity: Adjustable
Position and sensitivity: Adjustable
Fixed
Detect with I-mark sensor or Gap sensor
Fixed
Fixed
*When linerless cutter unit or dispenser unit is installed.
Fixed
*When cutter unit or linerless cutter unit is installed.