Interface - SATO CL4NX Operator's Manual

7 Appendix
Media (Use genuine media made by SATO.)
Size
Dispenser with Liner Rewinder
Pitch
(With Liner)
Width
(With Liner)
Diameter of Liner
Winding
Linerless Cutter
Pitch
Width
Roll Diameter
(Media Roll)
Core Diameter
(Media Roll)
Height
(Fan-fold Media)
Thickness
7.6.3

Interface

Interface
Standard
Option Board
238
CL4NX Operator Manual
203/305/609 dpi: 27 to 397 mm (1.06" to 15.63")
RFID mode: 27 to 240 mm (1.06" to 9.45")
203/305/609 dpi: 30 to 400 mm (1.18" to 15.75")
RFID mode: 30 to 240 mm (1.18" to 9.45")
22 to 128 mm (0.87" to 5.04")
25 to 131 mm (0.98" to 5.16")
Maximum 120 mm (4.72")
30 to120 mm (1.18" to 4.72")
32 to 128 mm (1.26" to 5.04")
Maximum 220 mm (8.66")
When using a dispenser with liner rewinder: maximum 220 mm (8.66")
76 mm, 101 mm (3", 4")
When using a dispenser with liner rewinder: 76 mm (3")
*Recommend to use 4" core for thick paper (more than 150 μm), non-
adhesive media and RFID tags/labels.
Maximum 200 mm (7.87")
*When the printer and media are configured to the same height
0.06 to 0.268 mm (0.0024" to 0.011")
Built-in USB Interface (Type B)
LAN Interface
Bluetooth Interface
USB Interface (Type A) x 2
Extension RS-232C Interface
Board IEEE1284 Interface
External Signal Interface (EXT)
Wireless LAN Interface