Safety Precautions - SATO CL4NX Operator's Manual

Before You Start

Safety Precautions

This section describes how to safely operate the printer. Be sure to read and understand all instructions
carefully before you install and use the printer.
Pictographic Symbols
This operator manual and printer labels use a variety of pictographic symbols. These symbols show the safe
and correct operation of the printer and how to prevent injury to others and property damage. The symbol
explanations are as follows.
The Warning symbol indicates that
you can cause death or serious
injury if you do not follow the
instruction or procedure.
Warning
Example Pictographs
The pictograph means "Caution is required". The pictograph includes a
specified warning symbol (for example, the left symbol shows electric shock).
The pictograph means "Must not be done". The pictograph includes a specified
prohibited symbol (for example, the left symbol means "Disassembly prohibited").
The pictograph means "Must be done". The pictograph includes a specified
mandate action symbol (for example, the left symbol means "Disconnect the
power plug from the outlet").
Place the printer on a stable area
• Place the printer on a stable area. Do not
place the printer on an unstable table,
slanted surface or an area subject to
strong vibration. If the printer falls off or
topples, it could cause injury to
someone.
Do not place containers filled with liquid on the
printer
• Do not place flower vases, cups, or other
containers filled with liquids, on the
printer. If any liquid spills into the printer,
immediately power off the printer and
disconnect the power plug from the
outlet. Then contact your SATO reseller
or technical support center. If you
operate the printer in this condition, it
could cause a fire or electric shock.
6
CL4NX Operator Manual
The Caution symbol indicates that
you can cause injury or property
damage if you do not follow the
Caution
instruction or procedure.
Warning
Do not place objects into the printer
• Do not place metal or flammable objects
inside the printer's opening. If a foreign
object gets into the printer, immediately
power off the printer and disconnect the
power plug from the outlet. Then contact
your SATO reseller or technical support
center. If you operate the printer in this
condition, it could cause a fire or electric
shock.
Do not use other than the specified voltage
• Do not use other than the specified
voltage. Doing so could cause a fire or
electric shock.