SATO CL4NX Operator's Manual page 147

Code Type
Applications > SDPL > Control Code > Code Type
Set the control code type.
The options are as follows:
• Standard
• Alternate 1
• Alternate 2
• Custom
SOH
Applications > SDPL > Control Code > SOH
Set the SOH code.
You can change the code only if you have selected Custom in the Code
Type menu.
The setting range is 00 to ff hex.
STX
Applications > SDPL > Control Code > STX
Set the STX code.
You can change the code only if you have selected Custom in the Code
Type menu.
The setting range is 00 to ff hex.
CR
Applications > SDPL > Control Code > CR
Set the CR code.
You can change the code only if you have selected Custom in the Code
Type menu.
The setting range is 00 to ff hex.
4 Operation and Configuration
CL4NX Operator Manual
145