Ribbon And Media - SATO CL4NX Operator's Manual

7.6.2

Ribbon and Media

Ribbon (Use genuine ribbon made by SATO.)
Size
Wind Direction
Winding Method
Media (Use genuine media made by SATO.)
Type
Size
Continuous
Pitch
(With Liner)
Width
(With Liner)
Tear-off/Cutter
Pitch
(With Liner)
Width
(With Liner)
Length: maximum 600 m (1968.5 ft.)
Width: 39.5 mm to 128 mm (1.55" to 5.04")
*The maximum length varies depending on the ribbon type.
*Use the ribbon that is wider than the media.
Face-out/Face-in
Coreless
Media roll (Face-in wound/face-out wound),
Fan-fold media
203 dpi: 6 to 2497 mm (0.24" to 98.30")
305 dpi: 6 to 1497 mm (0.24" to 58.94")
609 dpi: 6 to 397 mm (0.24" to 15.63")
RFID mode: 13 to 240 mm (0.51" to 9.45")
203 dpi: 9 to 2500 mm (0.35" to 98.42")
305 dpi: 9 to 1500 mm (0.35" to 59.05")
609 dpi: 9 to 400 mm (0.35" to 15.75")
RFID mode: 16 to 240 mm (0.63" to 9.45")
22 to 128 mm (0.87" to 5.04")
25 to 131 mm (0.98" to 5.16")
203 dpi: 17 to 2497 mm (0.67" to 98.30")
305 dpi: 17 to 1497 mm (0.67" to 58.94")
609 dpi: 17 to 397 mm (0.67" to 15.63")
RFID mode: 17 to 240 mm (0.67" to 9.45")
203 dpi: 20 to 2500 mm (0.79" to 98.42")
305 dpi: 20 to 1500 mm (0.79" to 59.05")
609 dpi: 20 to 400 mm (0.79" to 15.75")
RFID mode: 20 to 240 mm (0.79" to 9.45")
22 to 128 mm (0.87" to 5.04")
25 to 131 mm (0.98" to 5.16")
7 Appendix
CL4NX Operator Manual
237