SATO CL4NX Operator's Manual page 95

Button (PBC)
Interface > Network > Settings > Wi-Fi > Wi-Fi Protected Setup> Button
(PBC)
Set the wireless LAN connection using the push button method.
1. Select Button (PBC) in the Wi-Fi Protected Setup menu and press
the button.
2. When Scanning... shows on the screen, press the WPS button on the
access point of the wireless LAN device.
3. When the connection to the access point is established, Successfully
configured shows on the screen.
PIN
Interface > Network > Settings > Wi-Fi > Wi-Fi Protected Setup> PIN
Set the wireless LAN connection using the PIN code method.
1. Select PIN in the Wi-Fi Protected Setup menu and press the
ton.
2. When Scanning... shows on the screen, set the PIN code shown on
the screen to the access point of the wireless LAN or computer.
3. When the connection to the access point is established, Successfully
configured shows on the screen.
4 Operation and Configuration
but-
CL4NX Operator Manual
93