SATO CL4NX Operator's Manual page 98

4 Operation and Configuration
WEP Conf.
Interface > Network > Settings > Wi-Fi > WEP Conf.
Set the WEP key.
Shows only if you have selected WEP in the Security menu.
The setting items are as follows:
1 Authentication
2 Key Index
3 Key #1 - Key #4
Authentication
Interface > Network > Settings > Wi-Fi > WEP Conf. > Authentication
Set the WEP authentication method.
The options are as follows:
• Open System
• Shared Key
Key Index
Interface > Network > Settings > Wi-Fi > WEP Conf. > Key Index
Set the key index.
Set the key index (WEP key) according to the access point of the wireless
LAN you connect.
The setting range is 1 to 4.
CAUTION:
Depending on the product, the range of the key index may be 0 to 3. In
such a case, if you have set the printer to 1, then set the product to 0.
96
CL4NX Operator Manual
Set the WEP authentication method.
Set the key index.
Set the WEP key1 - key4.