SATO CL4NX Operator's Manual page 124

4 Operation and Configuration
Flow Control
Interface > Bluetooth > Flow Control
Set the communication protocol.
The options are as follows:
• Status3
• Status4 Multi
• None
Ignore CR/LF
Interface > Ignore CR/LF
Ignore or acknowledge the CR/LF code of the received data.
The options are as follows:
• Enabled: Ignore the CR/LF code.
• Disabled: Do not ignore the CR/LF code.
Ignore CAN/DLE
Interface > Ignore CAN/DLE
Ignore or acknowledge the CAN/DLE code of the received data.
The options are as follows:
• Enabled: Ignore the CAN/DLE code.
• Disabled: Do not ignore the CAN/DLE code.
122
CL4NX Operator Manual