5
Cleaning and Performing
Printer Adjustments
5.1 Maintenance
A dirty print head or platen roller not only affects the print quality but also causes printing errors. Use a
cleaning kit or cleaning sheet to clean the printer regularly.
CAUTION
• Do not touch the power switch or connect or disconnect the power cord with wet hands. Doing so could
cause an electric shock.
• Disconnect the power cord from the AC outlet before you begin cleaning.
The print head and its surroundings are hot after printing. Wait until the printer cools down.
• Touching the edge of the print head with your bare hand could cause injury.
• Use a cleaning pen, cotton swab or cotton cloth from a cleaning kit to clean. Do not clean with a hard object.
Doing so could cause damage.
• Remove the media and ribbon before cleaning.
Note
You can purchase a cleaning kit or cleaning sheet from a SATO reseller or technical service center.
CL4NX Operator Manual
175