Appendix; List Of Initial Values; Printing Menu - SATO CL4NX Operator's Manual

7

Appendix

7.1 List of Initial Values

The initial value refers to the setting value of the printer when shipped from the factory.
If you reset the printer, the setting values of the printer will change back to the factory default values. The
tables below show the initial value of each setting item and the types of reset that changes the value
back to the initial value.
CAUTION
It is generally not necessary to perform the initialization. Doing so will remove all the customer settings.
7.1.1

Printing Menu

Setting Item
Label Length
Label Width
Auto Measure
Ribbon
Ribbon Near End
Speed
Sensor Type
Auto-mode
Print Mode
Backfeed
Eject Cut
Darkness Range
Initial Value
203 dpi: 20000 dot
305 dpi: 18000 dot
609 dpi: 9600 dot
203 dpi: 832 dot
305 dpi: 1248 dot
609 dpi: 2496 dot
Disable
Use Ribbon
Enable
203 dpi: 6 ips
305 dpi: 6 ips
609 dpi: 4 ips
Gap
None (When Print Mode is Linerless)
Enabled
Tear-Off (No option is installed)
Cutter (When cutter is installed)
Dispenser (When dispenser is installed)
Before (If Print Mode is set to Tear-Off or
Linerless)
After (If Print Mode is set to Dispenser or
Cutter)
None (If Print Mode is set to Continuous)
0
A
Factory
User
Reset
Reset
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
CL4NX Operator Manual
207