Flow Control - SATO CL4NX Operator's Manual

Port2
Interface > Network > Services > Ports > Port2
Set the port number.
The setting range is 1 to 65535.
Each port (1, 2 and 3) must be set to different values.
Port3
Interface > Network > Services > Ports > Port3
Set the port number.
The setting range is 1 to 65535.
Each port (1, 2 and 3) must be set to different values.

Flow Control

Interface > Network > Services > Ports > Flow Control
Set the communication protocol.
The options are as follows:
• Status4
• Status4 ENQ
• Status3
• Status5
• None
BCC
Interface > Network > Services > Ports > BCC
Enable or disable the functions for BCC.
Shows only if you have selected Status5 in the Flow Control menu.
The options are as follows:
• Enabled: Enable the BCC check function.
• Disabled: Disable the BCC check function.
4 Operation and Configuration
CL4NX Operator Manual
103