SATO CL4NX Operator's Manual page 102

4 Operation and Configuration
Password
Interface > Network > Settings > Wi-Fi > EAP Conf. > Password
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. > Pass-
word
Set the password.
You can enter alphabetic, numeric and symbolic characters in the range of
0 to 32 characters.
Anon. Outer ID
Interface > Network > Settings > Wi-Fi > EAP Conf. > Anon. Outer ID
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. > Anon.
Outer ID
Set the external ID.
Shows only if you have selected FAST, PEAP or TTLS in the EAP Mode
menu.
You can enter alphabetic, numeric and symbolic characters in the range of
0 to 63 characters.
Verify Server Cert.
Interface > Network > Settings > Wi-Fi > EAP Conf. > Verify Server Cert.
Interface > Network > Settings > Wi-Fi > WPA Conf. > EAP Conf. > Verify
Server Cert.
Enable or disable server authentication.
Shows only if you have selected anything other than LEAP in the EAP
Mode menu.
The options are as follows:
• Enabled: Enable server authentication.
• Disabled: Disable server authentication.
100
CL4NX Operator Manual