SATO CL4NX Operator's Manual page 166

4 Operation and Configuration
Data
Tools > Reset > Select > Data
Initialize the data saved in the printer.
The data to be initialized are the fonts and graphics registered in the
printer.
When you select Data, the confirmation screen shows.
Press the left soft button to cancel or the right soft button to perform the ini-
tialization.
The printer will reboot after reset.
CAUTION:
It is generally not necessary to perform the initialization. Doing so could
change the print conditions.
Data & Settings
Tools > Reset > Select > Data & Settings
Initialize the data and setting values of the printer.
Select the setting items to initialize.
The options are as follows:
• User Reset: Initialize the data and setting values.
• User Reset (-Interface): Initialize the data and setting values that are
not included in the Interface menu.
• Factory Reset: Initialize to the status after factory shipment.
• Factory Reset (-Interface): Initialize the items that are not included in
the Interface menu to the status after factory shipment.
• Interface: Initialize the data and setting values in the Interface menu.
• Printing: Initialize the data and setting values in the Printing menu.
Select the item to initialize using the
soft buttons to perform the initialization.
The confirmation screen shows.
Press the left soft button to cancel or the right soft button to perform the ini-
tialization.
The printer will reboot after reset.
Refer to Section 7.1 List of Initial Values
ting items.
Note:
The data to be initialized are the fonts and graphics registered in the
printer.
164
CL4NX Operator Manual
/ buttons, then press the right
for the initial value of each set-