SATO CL4NX Operator's Manual page 135

Output Error Mode
Interface > RFID > Output Error Mode
Set the output signal for the RFID error.
The options are as follows:
• Pulse: Output a pulse as the output signal when an RFID error occurs.
• Level: Output a level as the output signal when an RFID error occurs.
Pulse Length
Interface > RFID > Pulse Length
Set the time period of the output signal for the RFID error.
Shows only if you have selected Pulse in the Output Error Mode menu.
The options are as follows:
• 100 ms
• 200 ms
• 300 ms
• 400 ms
• 500 ms
Counters
Interface > RFID> Counters
Set the RFID counter.
The setting items are as follows:
1 Life time
2 User
Shows the number of times you have written to
the RFID tag.
Shows the number of times you have printed
after the RFID counter had been cleared.
4 Operation and Configuration
CL4NX Operator Manual
133