SATO CL4NX Operator's Manual page 91

DNS
Interface > Network > Settings > IPv4 > DNS
If you have selected Static in Mode menu, set and check DNS server
addresses.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
Note:
You can register up to three IP addresses for the DNS server. Use a
comma to delimit different IP addresses.
IPv6
Interface > Network > Settings > IPv6
Set IPv6. The setting items are as follows:
1 Mode
2 DHCP
3 IP Address
4 Prefix Length
5 Gateway
6 DNS
CAUTION:
After setting, press the right soft button to enable the new setting. Press
the left soft button to cancel the new setting and return to the previous set-
ting.
Select the setting mode of the IP address.
Update the lease time of the IP address.
*Shows only if you have selected DHCP in
Mode menu.
Set and check the IP address.
If you have selected DHCP in Mode menu, the
screen shows the IP address you received from
the DHCP server.
If you have selected Static in Mode menu,
select to set the IP address.
Set and check the prefix.
Set and check the default gateway address.
If you have selected DHCP in Mode menu, the
screen shows the gateway address you
received from the DHCP server.
If you have selected Static in Mode menu,
select to set the default gateway address.
Set and check the address of the primary DNS
server.
If you have selected Static in Mode menu,
select to set the primary address of the DNS
server.
4 Operation and Configuration
CL4NX Operator Manual
89