SATO CL4NX Operator's Manual page 120

4 Operation and Configuration
Flow Control
Interface > RS-232C > Flow Control
Set the communication protocol.
The options are as follows:
• READY/BUSY Multi
• XON/XOFF Multi
• STATUS3
• STATUS4
• STATUS5
• None
BCC
Interface > RS-232C > BCC
Enable or disable the functions for BCC.
Shows only if you have selected Status5 in the Flow Control menu.
The options are as follows:
• Enabled: Enable the BCC check function.
• Disabled: Disable the BCC check function.
USB
Interface > USB
Set the USB connection.
The setting items are as follows:
1 Flow Control
2 BCC
Flow Control
Interface > USB > Flow Control
Set the communication protocol.
The options are as follows:
• Status4
• Status5
• None
118
CL4NX Operator Manual
Set the communication protocol.
Set the BCC check function.
*Shows only if you have selected Status5 in
the Flow Control menu.