SATO CL4NX Operator's Manual page 127

Inputs
Interface > External I/O > Signals > Inputs
Set the input pin No. of the Signal Print Start/Signal Reprint.
/
Press the arrow buttons to highlight the item that you want to
change, then press the
Press the button to save the settings and return to the Signals menu.
The setting items are as follows:
1 Start Print
2 Reprint
Note:
You cannot set any inputs using the same pin number. If you attempt to set
the same number, the settings will show in red and you cannot save the
settings.
/
arrow buttons to change the pin No.
Set the input pin No. of the Signal Print Start.
The options are as follows:
• PIN5: Set the Signal Print Start to 5PIN.
• PIN7: Set the Signal Print Start to 7PIN.
Set the input pin No. of the Signal Reprint.
The options are as follows:
• PIN5: Set the Signal Reprint to 5PIN.
• PIN7: Set the Signal Reprint to 7PIN.
4 Operation and Configuration
CL4NX Operator Manual
125