SATO CL4NX Operator's Manual page 132

4 Operation and Configuration
Retries
Interface > RFID > Retries
Set the number of reprint attempts for the RFID error.
The setting range is 0 to 9.
If you set to 0, the RFID error screen shows and printing continues.
Mark bad tags
Interface > RFID > Mark bad tags
Set the error print for the RFID tag error.
• Enabled: Enable the RFID error print function.
• Disabled: Disable the RFID error print function.
For details of the RFID error print, refer to
Tag Errors.
MCS
Interface > RFID > MCS
Set the Multi vendor Chip-based Serialization.
The setting items are as follows:
1 MCS
2 Chip Manufac-
turer
3 Pre-Encoded Tag
4 Assign Prefix
5 MCS Prefix Digit
6 Input Prefix
130
CL4NX Operator Manual
Section 7.5.1 Printing RFID
Enable or disable the Multi vendor Chip-based
Serialization.
Set the chip manufacturer of the RFID tag.
Enable or disable the pre-encoded tag.
Set how to assign the three digit prefix data.
Set the number of digits of the three digit prefix
data.
Set the three digit prefix data.