SATO CL4NX Operator's Manual page 133

MCS
Interface > RFID > MCS > MCS
Enable or disable the Multi vendor Chip-based Serialization.
• Enabled: Enable the Multi vendor Chip-based Serialization.
• Disabled: Disable the Multi vendor Chip-based Serialization.
Chip Manufacturer
Interface > RFID > MCS > Chip Manufacturer
Set the chip manufacturer of the RFID tag.
The options are as follows:
• IMPINJI
• ALIEN
• NXP
Pre-Encoded Tag
Interface > RFID > MCS > Pre-Encoded Tag
Enable or disable the pre-encoded tag.
The options are as follows:
• Enabled: Enable the pre-encoded tag.
• Disabled: Disable the pre-encoded tag.
Assign Prefix
Interface > RFID > MCS > Assign Prefix
Set how to assign the three digit prefix data.
The options are as follows:
• Auto: Set to the manufacturer prefix selected in Chip Manufacturer.
• Manual: Set to the prefix determined by the MCS Prefix Digit and Input
Prefix.
4 Operation and Configuration
CL4NX Operator Manual
131