Tools Menu - SATO CL4NX Operator's Manual

4 Operation and Configuration
4.4.5

Tools Menu

In the Tools menu, there are setting items as follows:
Tools
1 Test Print
2 HEX-Dump
3 Reset
4 Service
5 Factory
6 Certificates
7 Startup Guide
Test Print
Tools > Test Print
Perform a test print.
The setting items are as follows:
1 Factory
2 Configure List
3 Configure QR
4 Paper Sensor
156
CL4NX Operator Manual
Perform a test print.
Save the Hex Dump print data or the dump
data from the receive buffer to the USB mem-
ory.
Initialize the configuration of the printer.
These are the setting items for service.
Strictly for SATO authorized service personnel
use.
These are the setting items for factory.
Strictly for SATO authorized personnel use.
Set the wireless LAN authentication.
* Available only if you have installed the USB
memory.
Enable or disable the startup guide.
Perform the factory test print.
Print the configuration information of the printer.
Print the configuration information with a QR
code.
Print the detection result of the media sensor
level.