SATO CL4NX Operator's Manual page 134

4 Operation and Configuration
MCS Prefix Digit
Interface > RFID > MCS > MCS Prefix Digit
Set the number of digits of the prefix data.
The options are as follows:
• None: Set the number of digits of the prefix data to 0.
Fill in 0 for all three 3 digits of the prefix data.
• 1bit: Set the number of digits of the prefix data to 1 digit.
Fill in 0 for the lower 2 bits of the prefix data.
• 2bits: Set the number of digits of the prefix data to 2 digits.
Fill in 0 for the lower 1 bit of the prefix data.
• 3bits: Set the number of digits of the prefix data to 3 digits.
Input Prefix
Interface > RFID > MCS > Input Prefix
Set the three digit prefix data.
This screen shows only if you have selected Manual in the Assign Prefix
menu.
The setting range is 0 to 7.
Log RFID Data
Interface > RFID > Log RFID Data
Set the log function to record the RFID data.
The log data can record up to100 tags of information.
The options are as follows:
• Enabled: Enable the log function to record the RFID data.
• Disabled: Disable the log function to record the RFID data.
Data To Record
Interface > RFID > Data To Record
Set the data to record the log when Log RFID Data is enabled.
The options are as follows:
• EPC and TID: Store the EPC and TID data.
• EPC: Store the EPC data.
• TID: Store the TID data.
132
CL4NX Operator Manual