SATO CL4NX Operator's Manual page 123

ISW
Interface > Bluetooth > ISW
Set the ISW communication parameter.
The setting range is 0, or 17 to 4096.
Set to a value that is lower than the ISI communication parameter setting
value.
PSI
Interface > Bluetooth > PSI
Set the PSI communication parameter.
The setting range is 18 to 4096.
Set to a value that is higher than the PSW communication parameter set-
ting value.
PSW
Interface > Bluetooth > PSW
Set the PSW communication parameter.
The setting range is 17 to 4096.
Set to a value that is lower than the PSI communication parameter setting
value.
CRC Mode
Interface > Bluetooth > CRC Mode
Enable or disable the functions for CRC.
The options are as follows:
• Enabled: Enable the CRC function.
• Disabled: Disable the CRC function.
4 Operation and Configuration
CL4NX Operator Manual
121