SATO CL4NX Operator's Manual page 85

Start Online
Printing > Advanced > Start Online
Select default mode at power on.
The options are as follows:
• Enabled: The printer powers on in online mode.
• Disabled: The printer powers on in offline mode.
Feed After Error
Printing > Advanced > Feed After Error
Automatically feeds the media when recovering from an error and chang-
ing to online mode.
The options are as follows:
• Enabled: Feed the media when changing to online mode after recover-
ing from an error.
• Disabled: Do not feed the media when changing to online mode after
recovering from an error.
Feed At Power On
Printing > Advanced > Feed At Power On
Automatically feeds the media at power on.
The options are as follows:
• Enabled: Feed the media when the printer is powered on.
• Disabled: Do not feed the media when the printer is powered on.
Max Feed
Printing > Advanced > Max Feed
Set the media feed amount for Tear-off, cut and dispense stop.
Set the media feed amount based on the print head position of 0.
The actual media feed amount is the value of Offset + Max Feed.
The setting range is as follows:
The setting range varies depending on the print resolution of the printer.
• 203 dpi: 0 to 2040 dots
• 305 dpi: 0 to 3060 dots
• 609 dpi: 0 to 6120 dots
4 Operation and Configuration
CL4NX Operator Manual
83