SATO CL4NX Operator's Manual page 112

4 Operation and Configuration
Authentication Passphrase
Interface > Network > Services > SNMP > Agent > Read-Write > Authenti-
cation Passphrase
Set the authentication passphrase.
Shows only if you have selected Authentication or Privacy in the User
Security menu.
You can enter alphabetic, numeric and symbolic characters in the range of
0 to 32 characters.
Initial setting: mypassword
Privacy Protocol
Interface > Network > Services > SNMP > Agent > Read-Write > Privacy
Protocol
Set the authentication privacy protocol.
Shows only if you have selected Privacy in the User Security menu.
The options are as follows:
• DES
• AES
Privacy Passphrase
Interface > Network > Services > SNMP > Agent > Read-Write > Privacy
Passphrase
Set the authentication privacy passphrase.
Shows only if you have selected Privacy in the User Security menu.
You can enter alphabetic, numeric and symbolic characters in the range of
8 to 32 characters.
Initial setting: mypassword
110
CL4NX Operator Manual