Hex Dump Mode - SATO CL4NX Operator's Manual

HEX-Dump
Tools > HEX-Dump
Save the Hex Dump print data or the dump data from the receive buffer to
the USB memory.
The setting items are as follows:
1

Hex Dump Mode

2 Buffer Dump
3 Log Files
Hex Dump Mode
Tools > HEX-Dump > Hex Dump Mode
Enable or disable the Hex Dump mode.
If you set the Hex Dump mode to Enabled, the printer prints the received
data and at the same time creates a file of the received data inside "hex-
dump/".
When you return the setting to Disabled, you can check the file on the dis-
play.
Notes:
• If you set the Hex Dump mode to Enabled, the design of the Online/
Offline screen changes.
• You can save a maximum of ten received data files for each type of
interface. Depending on the file size, the number of files you can save
will be less than ten.
• The details of the files created inside "hexdump/" are as follows:
• BT00xx.bin: Received data through Bluetooth.
• LAN00xx.bin: Received data through LAN.
• LPT00xx.bin: Received data through IEEE1284.
• SCI00xx.bin: Received data through RS-232C.
• USB00xx.bin: Received data through USB.
Enable or disable the Hex Dump mode.
Save the receive buffer data to the printer.
Manage the log files of the printer.
4 Operation and Configuration
CL4NX Operator Manual
161